Description

Hydra Waterproof Agent

Instant Anti Leakage Sealing

This anti-leakage sealant is formulated with a quick-drying, waterproofing ingredient that effectively repels any liquid penetration. It features an excellent bonding that can instantly repair and fill through any holes, gaps, cracks, and other fractured surfaces. Saving you from the problems of heavy drippings, pooling, and wet patches especially when the rainy months come. Moreover, this leak-trapping coat can withstand an onslaught of continuous extreme weather conditions without sagging, melting, or flaking.

DIRECTIONS:
Clean surface of dirt, dust, grease and oil. Make sure surface is dried completely.
Stir contents for 30 seconds until it is thoroughly mixed.
Apply to surface by brush, roll, trowel, dip or pour. Ensure surface is completely covered.
Apply multiple coats to ensure all cracks and holes have been filled. Allow to cure in between coats and before water exposure. Full cure at 24-48 hours.
NOTE: Test finished project with light water exposure to ensure all cracks have been filled. If test fails, apply additional coats. Do not use for gaps larger than 1/4″. Apply between 50F and 120F.
PAINTING: Works with both latex and oil based paints. When coating with oil based paints, use a primer first before painting.
CLEAN UP: Wipe up any unwanted material with a dry cloth or paper towel immediately. Use mineral spirits to clean applicators such as brushes and rollers.